The blowing machine is divided into seven layers of heating lamps

Update:29 29-01-2019

Blowing machine introduction A blow molding machine is […]

Blowing machine introduction
A blow molding machine is a machine that can blow a good preform into a bottle by a certain process.
PET multi-function plastic bottle blowing machine is divided into two control systems, customers can freely choose according to requirements, can control technical parameters more accurately, the machine is simple and safe to operate, and adopts double emergency stop control at different positions, and single point in different positions. The dynamic revelation button and the double-point start button control make the operator convenient in the work. The machine only needs one person to operate, no special training is required, and the machine has a special high and low pressure air storage device inside, and the user can supply gas by a single gas source. Or the dual air source can supply more gas, the clamping device adopts the double crank clamping mode, the clamping force is large, the machine installation is very simple, and the operator is easy to operate and maintain.
Suitable for blowing carbonated beverage bottles, mineral water bottles, cosmetic bottles, oil bottles, space cups, medicine bottles, etc. Plastic hollow containers (PET.PC.......)
Infrared multi-function plastic preform heater is a three-phase four-wire 380V power supply (also available with 220V power supply). The machine is divided into seven layers of heating lamps, which are divided into four heating zones. The electrical box contains electric heating control components. The heat time is generally about 5-8 minutes. The temperature is sent to the temperature controller by the thermocouple for automatic temperature control, so that the temperature inside the heating box is smoothly controlled, the infrared penetrating power is strong, the heating is uniform, fast and reliable, and the preform is ideal. The heating effect is carried out after one cycle of the preform is heated, and the specific temperature is adjusted according to the shape of the bottle.

a href="/wp-content/uploads/2018/08/yuming-fujian.rar">Project completion environmental protection acceptance monitoring report form