FAQ FOR HIGH SPEED BLOW MOULDING MACHINE PRODUCTS
High Speed Blow Molding Machine products common problems and solutions in the blowing process 1. What to do with the material accumulated at the bottom of the bottle blown out by the blow molding machine? Analysis: The common cause of bottle accumulation is that the stretching rod is not adjusted in place. It is recommended that the stretching ratio between the preform and the bottle body should be 1:2.5 (not including the bottle mouth), and at the same time adjust the heating temperature to prolong the pre-blowing gas.
High Speed Blow Molding Machine products common problems and solutions in the blowing process
1. What to do with the material accumulated at the bottom of the bottle blown out by the blow molding machine?
Analysis: The common cause of bottle accumulation is that the stretching rod is not adjusted in place. It is recommended that the stretching ratio between the preform and the bottle body should be 1:2.5 (not including the bottle mouth), and at the same time adjust the heating temperature to prolong the pre-blowing gas.
2. What should I do if the mouth of the bottle blown out by the blow molding machine is deformed?
Analysis: Deformation of the bottle mouth Generally, during the heating process of the preform, the transmission chain drives the bottle base to transmit the temperature to the preform mouth. During the heating process, the temperature continues to accumulate, and the bottle mouth appears bulging and deformed. It is only necessary to increase the air cooling or water cooling of the bottle outlet. If the customer's conditions permit, you can refer to the practice of imported machines and install central air conditioning in the production workshop to keep the ambient temperature of the workshop at normal temperature.
3. How should the bottle blowing machine be operated, and what accessories should be checked usually?
Analysis: As long as the equipment is operated strictly according to the method in the High Speed Blow Molding Machine products manual, and the performance of each safety door is checked regularly, the overall equipment is safe. However, the biggest hidden danger of the equipment is mainly on the seals of the water jacket and the air jacket. For example, the water and air jackets are damaged, and the maintenance project is more troublesome.
Summary：
High Speed Blow Molding Machine products common problems and solutions in the blowing process 1. What to do with the material accumulated at the bottom of the bottle blown out by the blow molding machine? Analysis: The common cause of bottle accumulation is that the stretching rod is not adjusted in place. It is recommended that the stretching ratio between the preform and the bottle body should be 1:2.5 (not including the bottle mouth), and at the same time adjust the heating temperature to prolong the pre-blowing gas.
Author：
Source：
Date：
2022-11-30
Other information
TAIZHOUYUMING MACHINERY CO.LTD (Main factory)
Address:Shangjin Industrial Park,Yanjiang Town,Linhai, Taizhou City,Zhejiang ProvinceChina
Fax:+86-576-84197571
BRANCH:HUBEI SANMI PLASTIC CO.,LTD
(branch factory)
Address:Nancheng Industrial Park, Anlu City, Hubei Province
BRANCH:ANHUI YUMING MACHINERY CO.,LTD
(branch factory)
Address:Intersection of 309 Provincial Road and Jingsi Road, Yanggang Industrial Park, Economic Development Zone, Woyang, Bozhou City, Anhui Province
contact
Our team are on hand 24 hours and 7days per week to answer any questions and inquiry that you may have
Copyright © Taizhou Huangyan Yuming Machinery Factory. All Rights Reserved.